User Manual V4.2
25
6.3 AC Side Connection
1) Integrated RCD and RCM
The Omniksol inverter is equipped with integrated RCD (Residual Current Protective Device)
and RCM
(
Residual Current Operated Monitor). The current sensor will detect the volume of
the leakage current and compare it with the pre-set value, if the leakage current exceeds the
permitted range, the RCD will disconnect the inverter from the AC load.
2) Assembly Instructions
a.
Strip the cable with the length 0.276 inches (9/32”) - (7mm) and please be careful NOT
to nick conductors.
b. Screw off and separate each component of AC connector as follows.
c. Pass the cable through each component from left to the right as follows.
DANGER
DANGER to life due to potential fire or electricity shock.
NEVER
connect or disconnect the connectors under load.
