Omniflex Omni8m C1477B Series, Руководство пользователя

Страница: 11 / 30

C1477B User Manual (UMC1477BR04) - 11 - Copyright Omniflex
3. MECHANICAL INSTALLATION
The overall dimensions and panel cut-out size of a single unit are given in the following
Figure:
Fascia DIN 48x96mm
DIMENSIONS IN mm
PANEL CUTOUT
Tighten Nuts to
clamp Omni8µ
AGAINST PANEL
THICKNESS: 8mm
MAXIMUM PANEL
4
2
4
4
92 180
4
8
Location of
DIP switches
Mounting
bracket
Figure 3-1: Mounting an Omni8

3.1 Installing the Omni8

in a panel.
Remove the metal bracket from the unit by removing the two nuts holding the bracket to
the unit and slide it off the rear of the unit.
Insert the Omni8

into the panel from the front.
Replace the bracket by sliding it on from the rear and tightening the two nuts. Make it is
horizontal and it is secure against the front plate.
.