Omnicomm OKO 3.0, Руководство по сборке

Страница: 38 / 56

EN
37
Electronic version
The recommended place for the installation of GSM and 3G antennas
is on the windshield or on the horizontal surface of the dashboard, in
a place with a good access to the radio signal from the sky.
SIM Card Installation
Before installation of the SIM cards:
• Disable PIN code protection before activating it. To do this, install
the card in any mobile cellphone and disable request for SIM PIN,
following the phone’s operating instructions
SIM card installation sequence:
• Using a pointed tool, press the button located on the SIM1 or SIM2
slot side. The SIM card holder will slide out
• Remove the SIM card holder from the connector slots and insert
the SIM card into it with the contacts facing up
• Reposition the tray with the SIM-card into the slot
SD Cards Installation
Insert the SD cards into the corresponding SD1 and SD2 slots.
To use the video terminal, it is necessary to install 2 SIM-cards: SIM1 -
for transferring telemetrics data, SIM2 - for transferring video files. For
SIM 2, the service fee must cover the transfer of large files.
When installing SD cards, Omnicomm OKO terminal power should be
switched off.