Omnicomm LLS-AF 4, Руководство пользователя

Страница: 25 / 31

EN
24
• “Enable”, additional filtration of the sensor readings willbe
performed
• “Disable”, additional filtration will not be performed
Installation of sensor
On the base of sensor install the gasket supplied with the product.
Fix the sensor on the tank with bolts by inserting flat and spring
washers.
Preparation and wiring to connect the sensor to an external device
Pin and wire colours assignment to connect to an external device is
shown in Figure 3.
Signal name Wire Colour
RS-485 A
RS-485 B
Output A-F
Green
GND A Green-white
PWR Brown
GND White
Figure 3. Pins assignment
RS-485 A
RS-485 B
Output A-F
GND A
PWR
GND