Omnicomm LLS-AF 4, Руководство пользователя

Страница: 23 / 31

EN
22
Setting the product with the Omnicomm Configurator
Full/Empty Calibration
1. Click on “Sensor Configuration”. Carry out setting with the fuel,
with which the product will work
2. Immerse sensor into the calibration tube
3. Fill the calibration tube with specific fuel so that the sensor is
entirely covered with fuel. Wait for 1 minute at least
4. In the program window click on the button“Full”. Opposite to the
“Full” button it appears the inscription “set”
5. Remove the product from the calibration tube and allow the fuel
to flow out for 1 minute
6. In the program window click on the button“Empty”. Opposite to
the “Empty”button it appears the inscription “set”
7. Click on “Save to sensor”
Configuring the output signal
1. Select a type of the output signal: “Analogue signal” or “Frequency
signal”
• For an analogue signal set the output voltage range:
Maximum voltage value from 5 to 20 V. The default value is 5 V
Minimum voltage value from 0 to 15 V. The default value is 0 V
• For a frequency signal:
Maximum frequency value from 100 to 2000 Hz. The default value is
2000 Hz.