Omnicomm LLS-AF 4, Руководство пользователя

Страница: 22 / 31

EN
21
Installation of two sensors in a fuel tank can significantly reduce
dependence of fuel level from the angle of inclination of the vehicle
(Figure 2).
Preparation to installation into a fuel tank
The sensor must be fixed with nut rivets on plastic or metal tank with
walls at least 3 mm thick.
The sensor must be fixed on threading or with self-tapping screws.
Cut of the product for a specific fuel tank
Use a ruler to measure the depth of tank. Cut the probe of a sensor
so, that it is 20 mm smaller than the tank depth. In the place of
cutting, install insulating cap supplied with the sensor.
Figure 1.
Figure 2.