Omnicomm LLS 5, Руководство пользователя

Страница: 31 / 39

EN
30
Electronic version
“Data rate” – select the rate for data exchange with external device.
(Default value – 19200 bit/s).
“Automatic data output” – select:
• “Off” – no independent data output (without request) is performed
• “On” – independent binary data output
“Data output interval” (1 to 255 seconds) – set the automatic data
output interval.
The automatic data output mode can be used only when not more
than one Omnicomm LLS 5 sensor is connected to one interface and
using exclusively the LLS protocol.
«Compensate for thermal expansion of fuel» – check the box to
disable tracking fuel level changes due to temperature fluctuations
(when the «Automatic adjustment» parameter is switched on).
«Compensation algorithm threshold» – when this value of the
difference in sensor readings is reached, the automatic adjustment
function is triggered. Default value - 200.
«Modbus function» – select the Modbus protocol function. Default
value – «0x03». Possible values:
• «0x03» – holding register reading
• «0x04» – input register reading
«Level» – the address of the register with fuel level is specified.
Default value – 40001. Possible values:
• 40001 to 49999 if Modbus function is «0x03»
• 30001 to 39999 if Modbus function is «0x04»