Omnicomm LLS 5, Руководство пользователя

Страница: 26 / 39

EN
25
Electronic version
Preparation to installation on a fuel tank
1. Select the location for Omnicomm LLS 5 sensor installation
subject to the following requirements:
• Installation location should be as close as possible to the
geometric center and placed at the deepest level of the tank
(Figure 1)
• When installed, the sensor should not be in contact with
reinforcement ribs and internal equipment inside the tank
Installation of two sensors in one tank allows for significant
reduction of the fuel level dependence on the vehicle inclination
angle (Figure 2)
2. Steam out the tank to ensure compliance with the safety rules
3. Drill the center hole and four attachment holes according to the
User Manual
Figure 1. Selection of the installation place for Omnicomm LLS 5 sensor
Figure 2. Selection of the installation place for Omnicomm LLS sensor