Omnicomm LLS 5, Руководство пользователя

Страница: 18 / 26

Sealing
For Omnicomm LLS sensors, the sensor housing is sealed with a casing-seal and a
connector:
1. Install the casing-seal on the sensor housing
2. Place the pins in the grooves of the casing-seals, making sure that they are positioned
with the smaller diameter towards the jut of the casing, and push them all the way in
Once the pins are in place, the sensor cannot be removed without destroying the casing
of the seal.
Install the seal-tie on Omnicomm LLS 5 connector:
18
Sealing