Omnicomm LLS 4, Руководство пользователя

Страница: 27 / 32

EN
26
Electronic version
Fuel tank calibration
The fuel tank calibration is filling fuel tank with fuel from empty
to full with a particular filling interval and recording of the sensor
Omnicomm LLS 4 values in the calibration table.
It is also possible to calibrate the tank using drain method.
Sealing
There is an option to perform sealing of two bolts or self-tapping
screws and a connector in Omnicomm LLS 4.
1. Tighten the bolt or screw through the hole in the security seal
2. Press the security seal cap so it would snap shut
3. Enter the security seal/cap numbers into the installation log
Install the security seal on the connectors:
1. Connect the connectors so that they would snap shut
2. Thread a flexible element of the security seal through connectors
3. Thread a flexible element of the security seal in a hole of the
secutity seal body and tighten
4. Cut the projecting area of the security seal flexible element
Figure 5. Sealing