Omnicomm LLS 4, Руководство пользователя

Страница: 25 / 32

EN
24
Electronic version
• “Maximum” filtration is used when the vehicle operates under
tough road conditions
The “Automatic data output”, please select accordingly:
• “No” means that automatic data output (without request) is not
performed
• “Binary” means automatic output of data in binary format
• “Character-coded” means automatic output of data in character-
coded format
“Data output interval” (from 1 to 255 sec), please select the interval
of automatic data output.
“Baud rate”, select a speed at which the data transmission with the
external device will be performed. The default value is 19 200 bit/sec.
Installation and connection of the sensor
Put a gasket on the probe of Omnicomm LLS 4 for the place of
installation. Install the Omnicomm LLS 4 sensor in the fuel tank. Put
the protective cover on.
Fasten the Omnicomm LLS 4 sensor.
• When fastening with rivets, use the riveter
• When fastening with bolts, first put on the security seal on one
bolt, spring washer and flat washer
• When fastening on plastic fuel tanks with wall thickness over
3 mm, use self-tapping screws and a security seal (for one self-
tapping screw) included in the installation kit