OmniCell G4, Инструкция по установке и обслуживанию

Страница: 8 / 23

© 2011 Omnicell, Inc. Fingerprint Scanner & Card Reader Guide/ 67-2100 Rev A
Installing a Fingerprint Scanner on a 1-, 2-, and 3-Cell 1-5
Install the Fingerprint Scanner
10. Route the cable(s) through the two clips near the USB ports.
Figure 1-7. Route the cable(s) tough the two clips near the USB ports
11. Plug the USB cable(s) into the USB ports on the side of the eBox. The fingerprint scanner USB
ca ble should be plugged into USB0 and the card reader USB cable should be plugged into
USB1.
Figure 1-8. Plug the USB cable(s) into the USB ports
12. Push the eBox console back into the cabinet.