OmniCell G4, Инструкция по установке и обслуживанию

Страница: 7 / 23

1-4 Installing a Fingerprint Scanner on a 1-, 2-, and 3-Cell
Install the Fingerprint Scanner
Fingerprint Scanner & Card Reader Guide /67-2100 Rev A © 2011 Omnicell, Inc.
8. If installing a fingerprint scanner and card reader combo, route the two USB cables through
the plastic cable clip provided on the side of the console. If only a scanner or card reader is
being installed, route the single USB cable through the plastic clip provided.
Figure 1-5. Route the cable(s) through the cable clip
9. Route the cable(s) through the clips on the top of the eBox console.
Figure 1-6. Route the cable(s) through the plastic routing clips on top of the console