The Main Menu should appear:
Remote
Click on the “
Remote
” link option from the top menu or “
Meters & remote control
”
from the Main Menu.
You may see the Java logo and then the main Remote Control screen should appear. If audio is present on the
OmniaONE’s inputs, you should see the meters moving along with the audio. A small amount of flickering is
normal as the meter information is updated but if it is excessive or the meters are not moving smoothly, check your
network connection and/or update your video card drivers or settings.
There are 6 “tabs” in the FM style Remote Control applet:
Preset
,
Processing
,
In
,
Out, IO and Encode
.
Preset Tab
To enter the Preset menu, click
on the
“Preset”
tab and the
Preset dialog will appear:
From the Preset menu, you can
select, save and delete presets
stored in the OmniaONE unit.
These are the same operations
that can be performed from the
OmniaONE’s front panel, but
consolidated on a single menu.
To select a preset and put it “on the air”, double-click on it in the preset list, or highlight it and click the “
Select
”
button.
Note:
In the current software, when selecting presets from the remote, the
Preset:
name will not be refreshed on the
OmniaONE’s front panel. To refresh the front panel preset name, simply click the OmniaONE’s jog wheel to enter
one of the menus and then click “
<-Exit
”. (Or enter the Preset menu, rotate the Jog Wheel to the right and select
“
Cancel*
”
To save changes to the currently running user preset (as shown in the gray status bar at the bottom of the remote
window), click the “
Save Current
” button. It does not matter what preset is highlighted in the preset list. The
currently running preset will be updated with your changes.
50
