background image

HAZARD / WARNING LABELS 

 

 

The 

Exclamation Point 

symbol, within an equilateral triangle, alerts the user to the 

presence of important operating and maintenance (servicing) instructions in product 
literature and instruction manuals. 
 

 

The Lightning Flash With Arrowhead

 symbol, within an equilateral triangle, alerts 

the user to the presence of non-insulated dangerous voltages within the product's 
enclosure that may be of sufficient magnitude to constitute a risk of electric shock.

 

 
 

 
WARNING --

 This equipment generates, uses, and can radiate radio frequency energy. If not 

installed and used in accordance with the instructions in this manual it may cause interference to 
radio communications. The device has been formally submitted for testing and found to comply 
with the limits for a Class B computing device (pursuant to subpart J of Part 15 FCC Rules) and 
has been designed to provide reasonable protection against such interference when operated in a 
commercial environment. Operation of this equipment in a residential area may cause 
interference, and the user and at his expense will be required to take any measures required to 
correct interference. 
 

CANADA WARNING

 

 This digital apparatus does not exceed the Class B limits for radio 

noise emissions set out in the Radio Interference Regulations of the Canadian Department of 
Communications. Le present appareil numerique n'emet pas de bruits radioelectriques depassant 
les limits applicables aux brouillage radioelectrique edicte par le ministere des Communications 
de Canada. 
 
 

 

viii

Содержание ONE FM







































































Отзывы: