Omni-ID Sato CL4NX, Руководство пользователя

Страница: 14 / 17

14
PRINT TROUBLESHOOTING
Issue Possible Cause Solution
Labels won’t feed
Sensor location
Sensor setting
Re-locate sensor
Check gap sensing in menu
Re-calibrate sensor if necessary.
Barcode not straight Labels slipping
Increase head pressure or change
roller under head
No print at all
Ribbon in upside down
Wrong ribbon Turn ribbon around
Change ribbon to known good ribbon.
Partial print on one side Head pressure Re-balance
Print blurring Too much ink Reduce darkness
Print too light Too little ink
Increase darkness
Slow print speed
Increase head pressure both sides
ENCODING TROUBLESHOOTING
Issue Possible Cause Solution
Multi tag error Reading more than one tag Turn the read power down
Tag not found Cannot read or write the ag Adjust the read and/or write power
Read only error Calibration is wrong Turn the write power up
Encoding adjacent label
The distance between
labels is too small
Adjust Tag offset
Printer missing tag between
each printed tag
Gap Levels Incorrect Re calibrate Gap Levels
Print without RFID encoding
‘Write data to RFID tag’
deselected
Select ‘write data to RFID tag’ in s/w
WRITE TAG ERROR
displayed on label and
RFID tag error code
# 1018 displayed
Encoding data type is set to
ASCII string Select HEX encoded string in data type
menu