8
NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE.
WIRING DIAGRAMS
Wiring diagrams are provided here for refer-
ence purposes only. This information is also
provided on schematics attached directly to
the appliance on a pullout panel located within
the control compartment.
CAUTION: LABEL ALL WIRES PRIOR TO DIS-
CONNECTION WHEN SERVICING CONTROLS.
WIRING ERRORS CAN CAUSE IMPROPER AND
DANGEROUS APPLIANCE OPERATION.
WARRANTY
Your gas appliance is covered by a limited twenty
year warranty. You will find a copy of the war-
ranty accompanying this manual. Please read
the warranty to be familiar with its coverage.
Retain this manual. File it with your other
documents for future reference.
REPLACEMENT PARTS
A complete parts list is found at the end of this
manual. Use only parts supplied from the
manufacturer.
Normally, all parts should be ordered through
your distributor or dealer. Parts will be shipped
at prevailing prices at time of order.
PRODUCT REFERENCE INFORMATION
We recommend that you record the following important information about your fireplace.
Your Fireplace's Model Number _______________________________________
Your Fireplace's Serial Number ________________________________________
The Date On Which Your Fireplace Was Installed __________________________
The Type of Gas Your Fireplace Uses ___________________________________
Your Dealer's Name _________________________________________________
When ordering repair parts, always give the following information:
1.
The model number of the appliance.
2.
The serial number of the appliance.
3.
The part number.
4.
The description of the part.
5.
The quantity required.
6.
The installation date of the appliance.
To obtain warranty service, you are required to
show the servicer a bill of sale of the appliance or
other evidence of purchase to extablish the origi-
nal date of purchase and proof of ownership.
If you suspect that a defect exists in your
fireplace system and/or accessories or are in
need of service, please contact the installer of
the unit to obtain assistance. If you encounter
any problems or have any questions concern-
ing the installation or application of this sys-
tem, please contact your distributor directly. If
unsuccessful, please contact a NORDYNE dealer
or NORDYNE distributor in your area. If unable
to obtain local assistance, please write or call:
NORDYNE Warranty Deapartment
P.O. Box 8809
O'Fallon, MO 63366-8809
Collect calls will not be accepted.
(636) 561-7300
www.nordyne.com
Millivolt Wiring Diagram
If any of the original wire as supplied must be replaced,
it must be replaced with
Type AWM 105
°
C – 18 GA. wire.
Thermopile
TH
TP
TH
TP
*
TWIST WIRES TOGETHER TO OPERATE UNIT SOLELY BY
MANIPULATING THE GAS VALVE CONTROL KNOB; OR CONNECT
WIRES TO OPTIONAL ON/OFF SWITCH OR WALL SWITCH OR
THERMOSTAT OR REMOTE CONTROL TO OPERATE UNIT.
*
Schematic Representation Only
Gas Valve
Figure 10
BLOWER
G
W
120
VAC.
BK
Blower Wiring Diagram
Plug Blower Cord
into Bottom
Receptacle
of Outlet Box
*Blower ON/OFF control switch is factory installed
in the gas valve mounting bracket.
Junction Box
Red
Black
Black
Outlet Box Green
Ground Screw
Break Tab Off on
Hot side of Outlet Box
White Wire To Opposite
Side of Outlet Box
(Neutral Side)
Hot Side of
Outlet Box
Outlet Box
Schematic Representation Only
*Blower ON/OFF
Control Switch
Figure 11
