Copyright © 2020 Omix-Ada
®
, Inc.
460 HORIZON DR. SUITE 400 | SUWANEE, GA 30024 | PHONE: 770-614-6101 | FAX: 770-614-6069 | [email protected]
Complete Soft Top, CJ & YJ with Full Doors
Page
7
/1
0
14
.
With the Bow Assembly in position, locate
the Adjustable Spreader Bar.
Lock it in the up/straight position. Secure it by
inserting the steel pin through the hole of the
spreader bar-straight pin portion facing inside
the vehicle
.
15
.
To loosen or tighten your soft top, locate the
adjustable sleeve on the Spreader Bar. Remove
pin and twist to tighten or loosen the soft top.
Reinsert pin after adjustment is made.
Note:
Ensure to adjust the spreader bar equally
on both sides of the vehicle.
The adjustable bar can be used to keep your
soft top fabric tight in hot weather.
1
3
.
Pull the bottom of the rear support bow
back until it snaps into the notch in the Side
Belt Rail.
NOTE:
Bow must slip into notch in Side Belt
Rail.