Omitec OmiSmoke, Руководство по эксплуатации

Страница: 27 / 50

Test Procedures
27
FAS Test Procedure
The user will be prompted with the correct FAS test procedure.
During each FAS test fully depress the accelerator quickly but not violently in under
one second.
Press the tick key to acknowledge and proceed.
The display will show the smoke measurement and a 10 second count down.
The user should now be seated in the drivers seat with a handset or the PC screen in
viewing distance, and follow the automated instructions:
A schedule of up to 6 accelerations is automatically progressed by the OmiSmoke
with automatic calculation of pass / fail status. It may also request another repeated
acceleration if insufficient data was recorded.
Fast Test (Category A only)
After the 1st acceleration, on category A vehicles only, a reading of less than or equal
to the fast pass smoke limit (currently 1.5 K (m
-1
)) will automatically produce a fast
pass and as such will terminate the schedule at this point with a pass status. The test
results and print out will state ‘Fast Pass Result’.
For all other conditions the schedule will continue prompting the user to accelerate
and release until the arithmetic mean of the latest 3 readings is within the pass limit.
The schedule of tests up to a maximum of 6 will continue automatically.