Introduction
13
Setting the sensor probe depth gauge
The sensor probe is fitted with a depth gauge to prevent the probe from being inserted
too far (which could cause serious damage to the engine). Move the rubber sleeve on
the probe, so that the distance between it and the end of the probe, is equal to the
length of the dipstick (see illustration). Insert the probe (up to the depth gauge) into
the dipstick aperture.
Do not attempt to insert the engine temperature probe while the engine is
running. Moving engine parts may cause personal injury or come in
contact with the probe, or its cable, resulting in damage to the probe and
to the engine.
Take care not to come into contact with hot engine parts when inserting or
removing the engine temperature probe from the engine oil dipstick
aperture - serious burns may occur.
Take care when removing the engine temperature probe after an
emissions test. The probe may be extremely hot and could cause serious
burns.
Remove the oil temperature probe prior to carrying out an emission test.
Do not rev/accelerate the engine with the temperature probe inserted into
sump. Increased vibration may cause it to move and cause damage.
NOTE: Always clean the probe after use and clean the dipstick before re-inserting into
the engine.
OM0375
Содержание OmiSmoke
Страница 2: ......