Omicron Lab B-WIC, Руководство пользователя

Страница: 5 / 20

OMICRON Lab 5
Safety
2 Safety
2.1 Disclaimer
If the equipment is used in a manner not specified by the manufacturer, the protection provided by the
equipment may be impaired. Opening the device invalidates all warranty claims. Before operating the
B
‑
WIC and B
‑
SMC , read the safety instructions in this document carefully. If you do not understand
some safety rules, contact OMICRON Lab before proceeding.
2.2 Safety Instructions
► The
B
‑
WIC and B
‑
SMC are SELV (Safety Extra Low Voltage according to IEC 60950) devices, also
known as protection class III equipment.
► Only use the
B
‑
WIC and B
‑
SMC in conjunction with the Bode 100. Do not apply any external
voltages or currents.
2.3 Designated Use
B
‑
WIC and B
‑
SMC have been especially designed to measure the impedance of passive components in
conjunction with the Bode 100 in laboratory or manufacturing environments.
2.4 Operator Qualification
Testing with B
‑
WIC and B
‑
SMC must only be carried out by qualified, skilled and authorized personnel.
Personnel receiving training, instructions, directions, or education on B
‑
WIC and B
‑
SMC must be under
constant supervision of an experienced operator while working with the equipment. Testing with B
‑
WIC
and B
‑
SMC must comply with the internal safety instructions as well as additional relevant documents.
2.5 Cleaning
To clean the B
‑
WIC and B
‑
SMC , use a cloth dampened with isopropanol alcohol. Prior to cleaning, always
ensure that all connections to the B
‑
WIC and B
‑
SMC and DUT 1 are disconnected.
1 Device Under Test