OMG POLARIS DR120A, Руководство пользователя

Страница: 16 / 18

17 18
满油门触发延迟时间
当 Turbo 触发方式设为满油门时间触发时， 摇杆达到满油门位置和
Turbo 进角功能触发之间的延时时间。
Turbo Delay
The function refers to the continuous full throttle time activating turbo
requires. When turbo activation method is set to 'Full Throttle', the
turbo is just activated after the continuous full throttle time is up to the
preset time.
触发转速
Turbo 进角设为转速触发时,当马达转速超过预设触发转速时就会触
发 Turbo 进角功能。
Start RPM
When turbo activation method is set to 'RPM', the turbo is just activated
after the motor RPM is faster than the preset activation RPM.
Turbo全部 释放速度
当满足 Turbo 进角功能触发条件时 ,Turbo 进角按照设定的释放速度
开始增长，例如：如果设为 6°/0.1秒的 释放速度， Turbo 进角每 0.1
秒会增加6°，直到最大 进角。选择的释放速度越大 ,Turbo 进角增大
越快，车辆爆发力越强，加速度越快，马达发热也越大。
Turbo Slope ”ON”
When meeting the turbo activation condition, the turbo start to release
at the selected speed. E.g.: '6 deg/0.1sec' indicates releasing turbo
timing of 6 deg within 0.1 sec. The more it releases within 0.1 sec, the
faster the turbo releases, the faster the vehicle accelerates, the higher
the heat productivity of motor generates.
Turbo全部 关停速度
车辆到达直道末端时,需要关停 Turbo功能。 选择一定的 Turbo功能
关停速度进行线性降低，而不是使 Turbo 进角瞬间降低，车辆减速
更柔和，从而减少瞬间减速和刹车产生的破坏。
Turbo Slope “OFF”
When the turbo is activated, if the activation condition does not meet
such as: slowing down to turn in the end of straightaway, the 'Full
throttle' will be turned into 'Non full throttle'. When not meeting turbo
activation condition, if the turbo is closed instantly, an obvious slowing
down will occur such as: brake , which causes that the driveability
becomes worse. If the turbo is closed at a certain speed, slowing down
will become linear relatively, the driveability will be better.
编程卡仅适用于 RCOMG . CO ., LTD 生产的 DR120AX2 系列车用无刷
电调，该编程卡可以设置并存储多项不同的参数，便于使用者随时选
择最钟意的参数存储于电调。 可以作为独立的设备，直接利用 LCD
（液晶屏幕）显示电调参数，进行参数设定；也可以作为 USB 适配器
将电调和 PC 相连，利用 PC 软件实现电调程序的更新和参数设置功能。
编程卡使用说明书
LCD Program Card
Turbo LCD program card is only applied to Turbo series brushless ESC
produced by RCOMG Model. Users can choose their desired parameter
at any time. It has 2 use methods as follows: 1. Working as an individual
device to set the parameters; 2.Working as an USB adapter to update
the firmware and set the parameters on PC.
规格/ Specification
外形尺寸 / ：91x54x18mm Dimension
重量/ Weight ： 68g
供电电源 /Power supply：DC5.0V-12.0V