Coast
Max. Reverse force
Max. For ward force
Minus Range
Minus
Min. Throttle
设定项名称
设定项说明
Neutral Range
Throttle Response
Brake Response
Min. Brake Force
Max. Brake Force
Fwd. Drag Brake Force
Programmable Items Description-A
SECTION
THROTTLE
BRAKE
It indicates how often the ESC performs throttle adjustment.
When the throttle value changes from high to low, it will decrease every 0.01 second.For example: the current throttle stick is at 80%, and the next
moment is at 30%. If the throttle coast is not turned on, the throttle value will be immediately reduced from 80% to 30%. If it is turned on, the
throttle value will be 80%, 70%... 30% dropped so slowly. Note: If the throttle stick is at 0% at the next moment, the throttle value will be equal to 0
immediately. This item only works within the forward throttle range, and has the most obviouse ef fect at 30% throttle.
Throttle midpoint width, the range of the throttle stick in the centered state.
The minimum throttle, limit the throttle value can not be too small, this item can be adjusted according to the RC car conf iguration, the smaller
the lighter car, this item can be adjusted down, so that the RC car can get a very low speed, the larger the heavier car, this item can be adjusted
large, it can eliminate the jitter caused by insuf icient starting power.
Throttle minus, decay the throttle value. For example, if the throttle stick is at 20%, if the decay is not turned on, the throttle value is 20%.
After setting it to 1% decay, the output throttle value is 20% * (1-1%) = 19.8%. This item only works within the forward throttle range.
For example, if it is set to 50%, it means that the throttle below 50% will be used for throttle Minus. This item only works within the forward
throttle range.
If it is set to 80%, the actual throttle value is 80% when the throttle stick is at 100% of the forward throttle.
If it is set to 80%, the actual throttle value is 80% when the throttle stick is at the 100% position of the throttle in the reverse direction.
It indicates how often the ESC will perform the brake adjustment.
It limits the minimum braking force.
If the minimum braking force is set larger than the maximum braking force, the maximum braking force is equal to the minimum braking force.
It refers to the braking force when the throttle stick returns to the 0% position from the for ward stroke after the RC car moves for ward.
If it is turned on, the ESC will turn on correspond brake force when the throttle stick at the 0% position.
