Reproduction of part or all of the contents of this document in any form is expressly prohibited other than for individual use only. All text, images and labels are property of nimax Gmbh.
Step 6
we now need to selected he Outgoing port. Select
“Outgoing” if not already selected
Step 7
Click on the drop-down menu and select “Push+”
Step 8
From the Service tab select “Dev B”
Step 9
Click “OK”
Step 10
The two assigned COM ports will show up. The “Push+ Dev
B” COM port number should be used with softwares that
require this setting information such as “Cartes du Ciel”.
7.4. “Cartes du Ciel”. Settings for this planetarium software.
Step 1
To configure “Cartes du Ciel” select “Telescope” and click
“Telescope settings”
Figure 12. Select “Outgoing” and “Push+”
Figure 13. Select “Dev B”, click “OK”.
Figure 14. The assigned COM ports will show up. Use this information
for the settings of “Cartes du Ciel” or other computer softwares that
required this setup information.
Figure 15. Telescope settings.
