10
(6) Install the laser unit on the hold
plate by the screw knob.
(7) Connect the CMOS and the laser
unit to the power supply by the 12 pin
cables.
(8)The CMOS camera has two inputs.
One is for the 12-pin cable for the power
supply, and the other is for the Ethernet
cable for the signal.
(9) When the power of Power Supply is
ON by the key switch,
「
POWER/TRIG
」
lamp shows orange
color.
After 30 to 60 second it shows green,
and the measurement can be started.
専用ネジ
For the 6-pin power cable
For the GigE
Ethernet cable
