5
2) Power supply
The power supply contains the laser drive circuit, the power supply for the
CMOS camera and the intermediate connector for the CMOS camera.
Turn on the laser switch after the laser unit and the CMOS camera were
connected. Connection after the power being ON may destroy the laser diodes.
Front
Rear
The main power switch is the key switch. Turn it to the clockwise direction for
the power ON. When the key is on the OFF side, the key can be removed.
The Laser SW is for ON/OFF of the laser light. The Red laser SW is for
ON/OFF of the red pointer laser light. The red laser light does not affect the
blood flow value.
Connect the 12-pin cable between the Laser unit and the Connector for laser
unit. Connect the 12-pin cable between the CMOS camera and the Connector
for CMOS camera, too.
The GigE connectors have IN and OUT. Connect one GigE cable from the
CMOS camera to the IN, and connect the other cable from the OUT to the
computer-based image processor. The IN and OUT is connected inside the
power supply, and the CMOS camera is not damaged by misconnection.
Red laser SW
Connector for
laser unit
GigE connectors for CMOS
camera and the computer
Connector for CMOS camera
Power connector
Laser SW
Main power SW
