8
SET-UP
•
Place the unit on a dry and solid surface.
•
Ensure that the workplace is sufficiently ventilated.
•
Do not use a soft surface (i.e. carpet) as this may impede the ventilation of the unit.
•
Operation should only occur indoors.
•
Close the drain valve before filling the tank (turn the drain knob on the tank to the
horizontal position).
•
Fill the cleaning tank with a sufficient quantity of a suitable cleaning liquid and water
before turning-on the unit.
•
The marked maximum filling level of the tank indicates the recommended filling level
with items to be cleaned in the tank.
•
To quickly heat up the liquid in the tank and to prevent unnecessary energy losses, we
recommend use of the lid.
•
Do not exceed a temperature of 80°C inside the tank.
CLEANING
Timed
Select the required temperature.
Set the required ultrasonic cleaning period.
When the set cleaning period has run down, the ultrasonic activity switches off
automatically. The heating continues operating at the set temperature.
Continuous
For permanent operation turn the turning knob clockwise into “ON” position. In this
operating mode there is no automatic switch-off. The ultrasonic activity must be
switched off by hand. After the cleaning process has been finished, press the
key to
switch off. Alternatively, turn the knob back into “Off” position.
In order to avoid unintended permanent operation, the Omegasonics units are
equipped with a safety switch-off automatically. The unit switches off completely after 8
hours of permanent operation. If you wish to continue the operation, start the unit
again.
