8
Electrical/Wiring/Grounding
Electrical Service: General Purpose
Electrical Classification: Non-hazardous Type 1, 2, 3, 4 (equal to IP 65), 12, & 13
Power Requirements: 24 VDC (10-30 VDC) @ 80 mA
Electrical Connections: 5-Pin micro style for FV100 or 8-Pin micro style for FV100-T, DC
Cabling: 5 or 8 Pin DC female shielded cable (do not connect shielding at the panel)
Grounding: Note, that DC and Chassis Grounds are internally connected to eliminate electrical
noise. If this poses a problem with your control wiring, please contact UFM for an alternative
solution.
Current Output: 4-20 mA (Note: Use of a 250 Ohm, 0.1%, 1/2 watt precision resistor will produce a 1-5
VDC signal for voltage input receivers)
Solid State Relay: Optically isolated, current limited to 125 mA @ 30 VDC up to 185
°
F (85
°
C), de-
rated to 50 mA @ 30 VDC between 186
°
& 210
°
F (86
°
C to 99
°
C)
WIRING DIAGRAMS (Pin Configurations)
PIN CONFIGURATION:
•
1: + 24 VDC power supply
•
2: 4-20 mA flow signal out
•
3: supply ground
•
4: flow relay contact
•
5: flow relay contact
BROWN
WHITE
GRAY
BLACK
BLUE
LOAD
+24 Vdc SUPPLY
SUPPLY & CHASSIS GROUND
DC GROUND
INTERNALLY
CONNECTED
TO CHASSIS
FLOW RELAY CONTACT
FLOW RELAY CONTACT
4-20 mA FLOW SIGNAL OUT
3
5
4
2
1
PIN CONFIGURATION:
•
1: + 24 VDC power supply
•
2: 4-20 mA flow signal out
•
3: supply ground
•
4: flow relay contact
•
5: flow relay contact
•
6: 4-20 mA temp signal out
•
7: temp relay contact
•
8: temp relay contact
DC GROUND
INTERNALLY
CONNECTED
TO CHASSIS
BLUE
BROWN
RED
GRAY
GREEN
LOAD
TEMP RELAY CONTACT
WHITE
+24 Vdc SUPPLY
SUPPLY & CHASSIS GROUND
TEMP RELAY CONTACT
PINK
4-20 mA TEMP SIGNAL OUT
FLOW RELAY CONTACT
YELLOW
FLOW RELAY CONTACT
4-20 mA FLOW SIGNAL OUT
LOAD
3
8
4
5
6
7
2
1
FV100 (FLOW ONLY)
FV100-T (FLOW AND TEMPERATURE)
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
