Omega TCL-3M165E2 Series, Руководство пользователя

Страница: 29 / 60

Series TCL-3M165E2 Operation
Technical changes reserved - 29 -
5.2 Configuration range
The calibrator settings can be changed directly from the configuration range. You can get to
the windows of the parameters from the corresponding parameter fields.
The operation of the calibrator via the configuration range is particularly well suited for one-off
testing processes. You can directly set the required test conditions and then start the testing
process.
You can save the new test conditions under the current test task or a new test task. Without
saving, the test conditions are discarded.
IMPORTANT! In expert mode, keep the following in mind!
From the windows "Select Function" (

§ 5.4.1) and "Select DUT" (

§ 5.5.1) you can
switch to the expert mode for administering and configuring.

Follow the instructions in the corresponding sections.

Changes to functions and test specimens always affect all the test tasks linked to
them.
5.3 Window structure, operating elements and icons
The windows are divided into three ranges: the information line, the toolbar and the
parameter range.
Information line:
The information line is located at the top edge of
the window. It shows the name of the window and
the reference temperature.
Toolbar:
The toolbar is located along the right edge of the
window. It contains the icons available in this
window.
Parameter range:
The parameter range is the biggest part of the
window. Information about the window and other operating elements are displayed in it.