![background image](http://html1.mh-extra.com/html/omega/seamaster-aqua-terra-gold-and-steel/seamaster-aqua-terra-gold-and-steel_operating-instructions-manual_4227274040.webp)
39
En
gl
is
h
For your own peace of mind and convenience, we recom-
mend that you have the length and position of your rubber
bracelet adjusted by an authorised OMEGA service centre.
When adjusting the length of the strap, the clasp should be
set in its shortest position.
1)
Measure the circumference of the wrist using the flexible
measure, placing the blank end over the graduated part.
2)
remove the metal connectors from the clasp by pushing in the
two spring pins.
3)
Cut off the two lengths below the figure corresponding to the
number indicated on the flexible measure when the wrist was
measured. If there is any doubt as to the exact measurement, it
is preferable to cut at the upper graduation.
Adjusting the length of the rubber strap
Specific sections/general information
4
Содержание Seamaster Aqua Terra Gold & Steel
Страница 1: ...E 10...