![background image](http://html1.mh-extra.com/html/omega/rd2800-series/rd2800-series_user-manual_4188131074.webp)
-70-
11. OTHER PROGRAMMING
11.8 Engineering Units
3
Programming Flow Chart
<Example> From PPM to G/MIN in CH 3
Operation screen
[Check]
+
[To be ready for programming]
[Programming channel]
[
Programming engineering unit
character
]
,
Temporarily stored
Programming other channels?
+
Stored
(1) Select the channel to be “none” with
or .*
(2) Press and
simultaneously to clear and perform
[temporarily stored] and then [stored].
* If the channel is programmed by a
numeric value and cleared, the
engineering unit of channel before
programming change is programmed
to be “none”.
•
Press or to change
channels.
•
The digit displaying an engineering
unit character (digit No. with decimal
point) shifts with or .
•
Numeric value (0 to 9):
to , and
•
Alphabetic characters (A to Z):
Press and
simultaneously and select a character
by pressing or .
•
Special characters (%, /,
°
C,
°
F)
% ( +
)
/ ( +
)
°
C ( +
)*
°
F ( +
)*
*A space corresponding to 2 digits is used.
•
(space): A space is treated as
a character.
These engineering units are treated as
a printing unit only. They are not
treated as computing units.
Store the [temporarily stored]
parameters into the memory. (A
programming change mark is printed.)
Various keys
Channel
Cursor
YES
NO
Channel
Remarks
Decimal point
To check all
programmed digits
Reference 1
Engineering
unit character
%
/
°
C
°
F
SHIFT
SHIFT
SHIFT
SHIFT
0
CLEAR
9
LIST
-
(-)
SHIFT
6
A
~
Z
%
/
%
/
°
C
°
F
SPACE
COPY(=)
DISP
SHIFT
3
UNIT
SET
END
3
UNIT
°
F
ENTRY
SHIFT
SET
END
Storing
Reference 4
%
/
SHIFT
0
CLEAR
To program engineering unit
to “none”
Remarks
Programmable characters
and key operation
Reference 2
°
C,
°
F engineering unit
Reference 3
Ref. 1
Ref. 2
Ref. 4
Engineering
unit character
Engineering
unit character