![background image](http://html1.mh-extra.com/html/omega/rd2800-series/rd2800-series_user-manual_4188131066.webp)
-62-
11. OTHER PROGRAMMING
11.4 Subtract Printing
3
Programming Flow Chart
<Example> Printing [Channel 1 – Channel 2] at Channel 3 within a printing range of
±
250
Operation screen
[Check]
+
[To be ready for programming]
[
Programming channel for subtract
printing
]
[Programming equal]
+
[Programming reference channel]
[
Programming subtraction channel
]
→
[To Mode 2]
[
Programming subtract printing
range
]
Error message appears?
Temporarily sotred
Programming other channels?
+
Stored
You can check the range
programming (including subtract
printing) of other channels.
Press or to change
channels..
If a specified value (reference value) is
programmed instead of the subtraction
channel in the flow chart, the
difference with the reference value will
be printed. Add a decimal point to the
reference value.
•
Programming “to”:
+
•
Decimal point: in the next digit
•
Deletion of decimal point: in
the next digit
Store the [temporarily stored]
parameters into the memory. (A
programming change mark is printed.)
* Fill unused digits with spaces.
Channel
Cursor
Channel
YES
Subtract printing range
∗
NO
YES
NO
Cursor
Reference channel
Subtraction
channel
Minus
Reference
channel
DISP
SHIFT
7
RANGE
SET
END
3
UNIT
SHIFT
/
1
CHART
-
(-)
2
TAG
ENTRY
ENTRY
SHIFT
SET
END
SHIFT
-
(-)
・
CLOCK
SPACE
COPY(=)
Storing
Reference 3
Subtraction
channel
Subtract printing
channel
Other channels check
Reference 1
Programming reference channel
and subtraction channel
Reference 2
Various keys
Reference 3
Various
keys
Any key other
than
SHIFT
Ref. 1
Ref. 2
Ref. 3
Ref. 4
/
%