![background image](http://html1.mh-extra.com/html/omega/rd2800-series/rd2800-series_user-manual_4188131101.webp)
-97-
14. PRINTING FORMAT
14.3 Programming Zone Printing
3
Programming Flow Chart (RD200)
<Example> Programming CH 1 and CH 3 to zone No.1, and
CH 2 and CH 4 to zone No. 2
+
(
3 time
)
→
→
+
Press to display parameters.
The parameters are displayed
sequentially each time is
pressed.
Store the parameters into memory.
(Programming change mark is
printed.)
“+” mark is printed at the border of the
area.
*Fill unused digits with spaces
.
Cursor
Standard
Ref. 1
Zone
(1)
(2)
(3)
(4)
(5)
(6)
Cursor
DISP
SHIFT
DISP
SET
END
ºF
ENTRY
ENTRY
∗
∗
ENTRY
SHIFT
SET
END
ENTRY
ENTRY
Operation screen
[Checking printing format]
[To be ready for programming]
[Selecting zone printing]
[Programming channel of 1st area]
[To display step (4)]
Stored
Press any key other than
and program again. When it is normal,
the next screen appears.
SHIFT
Selection and
overlapping of channels
Remarks 3
The channel not selected in any
zone is skipped. Also, if the selection
of channel is overlapped or the
skipped channel is selected, error
display appears.
Checking parameters
Reference 1
Storing
Reference 2
Border mark
Reference 3
[Programming channel of 2nd area]
Remarks 1
Remarks 1
Remarks 2
Ref. 2
Remedial measure
to error display
Various
keys
Various
keys
Remarks 1
For storing parameters into memory,
return the screen to Step (4).
Return to the screen of Step (4)
Remarks 2