
11
EN
• Make sure the engine has stopped and is cool before doing
any maintenance on the machine. Contact with moving trim
-
mer head or hot muffler can cause personal injury.
BLADE
• Check the blade and clamping parts to see if they are loose, crac-
ked or bent.
• Check the cut edges and smooth them with a flat file.
Tip
1.
Keep the corner sharp.
2.
Round off the root of the edge.
3.
When using a grinder, do not use water.
• It is not necessary to adjust the gap
between the top sheet and the bottom
WARNING
8. MAINTENANCE
System/component
Process
Before
use
After
every
25h
After
every
50h
After
every
100h
Note
Fuel leaks, fuel spill
Clean
✔
Fuel tank, air filter,
fuel filter
Inspect/clean
✔
✔
Replace if necessary
Idle adjustment screw
See idle speed
setting
✔
Replace the carbure-
tor if necessary
Spark plug
Clean and read-
just plug gap
✔
DIST.: 0,6-0,7mm
replace, if necessary
Cylinder burr, intake air
vent duct
Cleansed
✔
Muffler, anti-spark
device, exhaust heating
element
Cleansed
✔
Throttle lever, ignition
switch
Check operation
✔
Cutting pieces
Replace if there
is any problem
✔
Gearbox
Grease
✔
Screws/Nuts/Bolts
Tighten/replace
✔
✔
Screws without
adjustment
Debris protection
Make sure to
attach
✔
ENGINE
AXIS
sheet as this product was designed to have the optimum gap
when properly adjusted.
(1) Bolt
(2) Plate
(3) Spacer
(4) Nut
When installing the blade, be sure to fit the spacer, plate and bolt,
then fit the nut.
IMPORTANT
Содержание PHILLIP ISLAND 2360
