Omega PHB21, Руководство пользователя

Страница: 21 / 38

6.6.
Equipment Operation mV - Set Up
SELECT FUNCTION
pH ºC mV
mV: READ /
/CHECK SET UP
PASSWORD
___
BATTERY
============
LANGU.: PORTUG./
/SPANISH ENGLISH
RANGE
-1999 to +1999mV
RESOLUTION
0.1 0.01
CALIBRATION
228mV @ 25ºC < >
CAL.INFORMATION?
/ Yes No
INFORM WITH:
200 READINGS < >
Go to Page 21
A
READ MODE
/ / CONT AVER. HOLD
TIME BETWEEN
READINGS 5s < >
19
Press key until option flashes, then
press key to confirm the option chosen.
<SELECT> mV
<ENTER>
Press key until option flashes, then
press key to confirm the option chosen.
<SELECT> Set Up
<ENTER>
A password is required to access the Set Up mode.
Press in sequence
, , . <SELECT> <ENTER> <ESCAPE>
Program will display the battery life left.
User has the option to choose the desired language.
Press
key until the desired option flashes,
then press key to confirm the option chosen.
<SELECT>
<ENTER>
This Screen is default and cannot be changed.
Select the Resolution by pressing key.
Option chosen will flash. Then press key to
confirm option chosen.
<SELECT>
<ENTER>
Option to choose the Calibration Standard value.
Refer to page 12 on how to adjust this value.
User can instruct the instrument to inform that
calibration is needed.
User can program the number of readings, before
instrument prompts for calibration. Refer to page 12
on how to adjust the number.
User can choose between the following Reading Modes:
Continuous - Read continuously after time is set
Average - Reads the average after time is set
Hold - user must press
key to Read
User can program the time between Readings. Refer to
Page 12 for instructions on how to adjust this time.
<ENTER>