Omega PHB21, Руководство пользователя

Страница: 14 / 38

6.1.
Equipment Operation pH - Set Up
SELECT FUNCTION
mV ºC pH
pH: READ /
/CHECK SET UP
PASSWORD
- - -___
BATTERY
============
LANGUAGE:PORTUG.
/SPANISH ENGLISH
RANGE
-2 TO 20 pH
RESOLUTION
0.1 0.01
CALIBRATION
POINTS: /3/4/5 2
ISO = 7.00pH
SENS.=4.01pH
<
<
>
>
INFORM CALIBR.?
/ Yes No
INFORM AFTER:
200 READINGS < >
REF. TEMPERATURE
20ºC / 25ºC
Go to Page 14
A
READING MODE
/AVER./ CONT HOLD
TIME BETWEEN READ
5s < >
12
Press key until option flashes, then
press key to confirm the option chosen.
<SELECT> pH
<ENTER>
Press key until option flashes, then
press key to confirm the option chosen.
<SELECT> Set Up
<ENTER>
A password is required to access the Set Up mode.
Press in sequence
, , . <SELECT> <ENTER> <ESCAPE>
User has the option to choose the desired language.
Press
key until the desired option flashes,
then press key to confirm the option chosen.
<SELECT>
<ENTER>
Program will display the battery life left.
This Screen is default and cannot be changed.
Select the Resolution by pressing key.
Option chosen will flash. Then press key to
confirm option chosen.
<SELECT>
<ENTER>
Option to choose how many calibration points you need.
Press
key until desired option flashes, then
press key to confirm chosen option.
<SELECT>
<ENTER>
User can fully adjust the Buffer values. In order to get to
know how to change the values, please refer to page 12.
User can instruct the instrument to inform that
calibration is needed.
User can program the number of readings, before
instrument prompts for calibration. Refer to page 12
on how to adjust the number.
User can choose Reference Temperature as of 20C
or 25C.
User can choose between the following Reading Modes:
Continuous - Read continuously after time is set
Average - Reads the average after time is set
Hold - user must press
key to Read
User can program the time between Readings. Refer to
Page 12 for instructions on how to adjust this time.
<ENTER>