Omega PHB21, Руководство пользователя

Страница: 15 / 38

6.1.
Equipment Operation pH - Set Up (cont.)
KEYBOARD BEEP?
/ Yes No
MAX. ALARM?
/ Yes No
DISPLAY?
/ Yes No
BARGRAPH?
/ Yes No
Min: 0pH
Max:14pH
<
<
>
>
BEEP ON STABIL.?
/ Yes No
End
X
MAX. VALUE:
12.00pH < >
MIN. ALARM?
/ Yes No
MIN. VALUE:
2.00pH < >
RS-232 OUTPUT?
/ Yes No
RS-232 OUTPUT:
/ PC PRINTER
SPEED (100 bps)
24 48 96 12
============
====
SPEED (100 bps)
24 48 96 12
PRINT MODE
/Man/Stab. Cont
PRINTING INTERVAL 5s
STATISTICS?
/ Yes No
From page 12
A
13
User can program the display to show information like
Barr graph, Keyboard Beep, Stability Beep and more.
User can choose if desire to have Barr graph shown
above the Reading screen. When Bar Graph is
displayed, the information about Sensibility and Sample
Temperature will not be displayed!
User can now adjust the Minimum and Maximum
values for the Bar Graph. Refer to Page 12.
User can choose if instrument would Beep when Stability
is reached during Read Mode or Not.
User can choose if instrument would Beep on Keyboard
touch or Not.
During this sequence, user will be able to choose alarms
and also adjust it’s values.
Will be able to choose if RS 232 is needed and if
connected to a PC or a Printer.
Press key until desired option flashes, then
press key to confirm the option chosen.
In order to adjust the values, refer to page 12.
< SELECT>
<ENTER>
Printing Mode
CONT.: Print continuously (based on the
printing interval chosen)
Prints the Read value just after
pressing key. But only after the
read value is stabilized (an arrow is displayed).
STAB.: Prints only one time, after the
reading is stabilized (an arrow is displayed).
MAN.:
<ENTER>
End
X
End
X