Omega OS-MINI SERIES, Руководство пользователя

Страница: 23 / 33

UNRESTRICTED
ACCESSORIES
A range of accessories to suit different applications and industrial environments is available. These may be
ordered at any time and added on-site. The following accessories are available from Omega:
Fixed mounting bracket (see above for dimensions): Allows rotational adjustment in one dimension.
Model number: OS210-FBS .
Adjustable mounting bracket (see above for dimensions): Allows rotational adjustment in two
dimensions. Model number: OS210-ABS .
Air purge collar (see above for dimensions): The air purge collar is used to keep dust, fumes, moisture,
and other contaminants away from the lens. It must be screwed fully onto the sensing head. Air flows
into the 1/8” BSP fitting and out of the front aperture. Air flow should be 5 to 15 l/min. Clean or ‘instrument’
air is recommended. Model
OS210-APSW is for use with sensors with 2:1 optics. Model OS210-APSN
is for use with all other OS-MINI models.
Laser sighting tool: When fitted to the sensor during installation or re-alignment, the laser sighting tool
pinpoints the center of the measured spot. Model number: OS210-LSTS .
Protective plastic window with stainless steel holder: When screwed over the lens of the sensor,
this provides extra mechanical protection for the germanium lens and helps retain fragments of the lens
in case of damage. The emissivity setting of the sensor should be adjusted to compensate for the
presence of the window. This accessory is suitable for use in ambient temperatures of 0 to 100°C. For
more information, please contact Omega. Model number extension:
-PWS (OS-MINI Only)
Dual laser sighting bracket: Indicates the center of the measured spot. Provides a secure mounting
for the sensor and allows continuous sighting while taking measurements. (OS-MINI22 Only)
MicroSD Card: Stores logged data. For use with MA-R-D and C4-R-D models. Includes SD Card
adapter. Model number: MSD. (Models with standalone electronics modules only)
OPTIONS
The following options are available. Options are factory installed and must be ordered with the sensor.
Calibration Certificate: UKAS traceable certificate showing the measured temperature at three points
across the sensor’s temperature range. (OS-MINI22 and OS-MINIUSB)
Extended Cable (30 m maximum total cable length): 1 m cable is supplied with each sensor as
standard. Extra cable can be added to this in increments of 1 m. (OS-MINI and OS-MINI22)
OS-MINIUSB AIR
PURGE