32
16.5
Pairing a new headset with the OS 531
If you purchase a new headset, you must pair the new headset with your OS 531. Detailed steps are as follows.
1.
Press and hold the power button for 5 seconds to enter the pairing mode.
When pairing, blue and red light blinks alternately.
2.
In the OS 531, enable the wireless headset function using below steps:
A.
Navigate to
Menu
>
Device Setting
>
Pairing Headset
.
B.
Switch on the
Wireless Headset
toggle.
3.
Click
Refresh
. The OS 531 searches for a new headset and shows “EDIFIER W860NB”.
4.
Click “
EDIFIER W860NB
” to pair with the headset.
When the OS 531 and the headset is paired, the OS 531 screen shows “EDIFIER W860NB connected”. You can
hear a prompt tone in the headset and its blue indicator blinks slowly.
16.6
Care and maintenance
•
Keep the product away from humid places to avoid damaging the internal circuit.
•
Do not put the product in places exposed to sun or in high temperature. High temperature will shorten
service life of electronic components, damage battery and deform plastic components.
•
Do not put the product in cold places to avoid damaging the internal circuit board.
•
Do not dismantle the product. Non-professional personnel ma damage the product.
•
Do not drop, vibrate strongly, strike the product with hard objects to avoid damaging the internal circuit.
•
Do not use drastic chemicals or cleaner to clean the product.
•
Do not use sharp objects to scratch product to avoid damaging the shell and affecting the product
appearance.
WARNING!
To guarantee your personal safety, please do not wear or keep headphones in the vicinity
(closer than 10 cm) of a pacemaker.
ATTENTION!
The maximum charging voltage is 5 V. Inappropriate charging may cause severe damage,
fire, or electrocution hazard.