12
1. Turn on the OS 531 by pressing the Power button
for a few moments.
The OS 531 starts up. When the process is
completed the home screen shown on the left
appears.
2. Access
Menu
>
Device Settings
3. Click
Language
and specify the device language.
4. Click
Date/Time
and specify the date, time, and time zone.
Note:
Wrong settings will lead to wrong date and time in a leak record, and in the LMS mode, lead to wrong date
and time in all reports, which cannot be corrected in the LMS.
5. To enable the wireless headset, do the following:
A.
Click
Pairing Headset
and then turn on the
Wireless Headset
toggle.
B.
Power on the headset by pressing and holding the Power button for 3 seconds.
After wireless connection is built, the message “EDIFIER W860NB connected” appears on the OS 531
screen .
Note
: The headset is paired with the OS 531 before delivery. The OS 531 can work with only the wireless headset
supplied by Omega air. After you purchase a new headset from Omega air, you must pair it with your OS 531 on
your own. For more information about the headset and its operations, see .
6. To
enable the device to play the voice recordings from the wired headset, click
Speaker Settings
, and then turn
on the <
Headset voice recording playback
> toggle. To adjust the volume, move the
Headset Volume
slide.
Note:
The device cannot play the voice recordings through the wireless headset.