![background image](http://html1.mh-extra.com/html/omega/om-cp-shock300/om-cp-shock300_instruction-sheet_736863002.webp)
Quick Start Steps
1. Install Omega 4 software (see specifications for compatible versions) and USB Drivers onto a Windows PC
(Windows XP SP3/7/8/10).
2. Launch the Omega Software.
3. The OM-CP-ULTRASHOCK-A and OM-CP-SHOCK300 come with a USB cable. Plug one end of the cable into
an available USB port on the PC and plug the opposite end of the cable into the communication port on
the OM-CP-ULTRASHOCK-A and OM-CP-SHOCK300. The drivers will install automatically.
4. The device will appear in the Connected Devices list, highlight the desired data logger. For most applications,
select “
Custom Start
” from the menu bar and choose the desired start method, reading rate and other
parameters appropriate for the data logging application and click “
Start
”. (“
Quick Start
” applies the most
recent custom start options, “
Batch Start
” is used for managing multiple loggers at once, “
Real Time
Start
” stores the dataset as it records while connected to the logger.) The status of the device will change
to “
Running
”, “
Waiting to Start
” or “
Waiting to Manual Start
”, depending upon your start method.
5. Disconnect the data logger from the interface cable and place it in the environment to measure. Note: The
device will stop recording data when the end of memory is reached or the device is stopped. At this point
the device cannot be restarted until it has been re-armed by the computer.
6. To download data, connect the logger to the interface cable. Highlight the data logger in the Connected
Devices list. Click “
Stop
” on the menu bar. Once the data logger is stopped, with the logger highlighted,
click “
Download
”. You will be prompted to name your report. Downloading will offload and save all the
recorded data to the PC.
OM-CP-ULTRASHOCK-A & OM-CP-SHOCK300