8
OPERATING INSTRUCTIONS
Cooking Surface
Control Panel
The induction cooktop appliance is operated by touching buttons, with the functions confirmed by LED
displays and acoustic signals.
Turning On and Turning Off the Cooktop Appliance
NOTE: Do not operate the cooktop without first placing a suitably sized cooking vessel containing food
on the appropriate cooking zone.
If the appliance is in Stand-By-Mode, it is put into Operating-Mode by pressing the On/Off button for at
least 1second. A beep signal indicates the successful operation acoustically.
On all Heat Level Displays a ´0` will appear and all Decimal Points of the Heat Level displays will flash (1
second on, 1 second off).
If there is no operation within 20 seconds, all the Heat Level Displays will automatically turn off. If the
displays are turned off, the hotplates will be re-set into Stand-By-Mode.
If
is pressed more than 2 seconds (in Operating-Mode), the appliance is switched off and is set into
the Stand-By-Mode again. The appliance can be turned off by pressing
at any time; even if other
buttons are pressed simultaneously.
If there is a residual heat of a hotplate remaining, this will be indicated in the correspondent heat setting
Heat Level Display as a red “H”.
7
Timer
Selection
