85
25
0.45
Wash (50
℃
)
Rinse
Rinse
Rinse (55
℃
)
Drying
AS/NZS 2007.1:
test in accordance with AS/NZS 2007.1.
This program is the test cycle. The information for comparability
NOTE
:
Select A Drawer
1.
Close the drawer, press the Power button to switch on the machine.
2.
Press the Drawer button to choose a drawer. After selecting a drawer, the response
light will turn on, and the corresponding drawer program, reservation, and other
information are displayed.
Starting A Cycle Wash
1.
After selecting the drawer, press the Program button to select the required program.
2.
Press the Start/Pause button, the dishwasher will start its cycle.
NOTE
:
After selecting the drawer, all other buttons (except the power button) operate
only for the current drawer.
NOTE
:
When the current drawer is running, you can press the drawer selection key to
switch to another drawer, and set and start the operation. Switch to the running
drawer after switching to the non-operating drawer after 5 seconds.
If two drawers are running at the same time, both drawer indicators light up.
This icon” ”indicates the currently displayed drawer.
After that the washing cycle of one drawer is ended , meanwhile another cycle in
the other basket is still running, the display will continue to show the information
above the finished cycle for 5 minutes. After that the information shown will be
the one of the currently running cycle.
Delicate
Running
Time
(min)
Water temp
(
℃
)
Program
Water
usage
(L)
Energy
usage
(Kwh)
Detergent
required
grams or
tablets
Drying
Time
(min)
8.5
29
1 piece
.
23 75g
30
NOTE
:
When the dishwasher is operating, do not force open the drawer, press the
Start/Pause button, and wait a few seconds before opening the drawer.
If the electric power to the dishwasher is interrupted during a wash program, it will
continue to the end of the program when the power is restored.
Changing The Program Once Started
A wash program can only be changed if it has not been running long. You need to
ensure that the wash water is still present and it has not drained out and began
rinsing. Detergent will have to be re added if there is no wash water present.
Here are the instructions to change the program:
1.
Press the Start/Pause button to pause the washing.
2.
Press the Program button for more than 3 seconds, the program will be cancelled.
3.
Press the Program button to select the desired program.
4.
Press the Start/Pause button, the dishwasher will start.
Adding Items While A Wash Is In Progress
You can add items after the wash program has begun.
However, if the machine no longer in the wash cycle, anything added may not be well
washed, washed properly, and result in food particles being transferred to already
washed items.Check that the machine is not rinsing.
Follow these instructions:
1.
Press the Start/Pause button to pause the washing.
2.
Wait 5 seconds then open the drawer.
3.
Add the extra items.
4.
Close the drawer.
It is dangerous to open the drawer
mid-cycle, as hot steam may
scald you.
CAUTION