![background image](http://html1.mh-extra.com/html/omega/odd614x/odd614x_instruction-manual_3951897019.webp)
Position the dishwasher in the cavity so the the drawer fronts are inline with the
adjacent cabinetry.
Draw the hoses and power cord through the their opening as you slide the product in.
This can be checked by using a spirit level on an open drawer.
Fit the dishwasher
Moisture protection tape
must be applied.
If need be, adjust the feet in each corner to
ensure the product sits evenly on the floor,
and is level both left to right and front to back.
This can be checked by using a spirit level on an
open drawer.
With suitable fasteners, fix the mounting brackets to the cabinetry.
Secure the product in place
15
Spirit level
16
Install the kick plate
1.
Prepare a kick plate as shown.
(The mounting hole position is measured by the machine at the factory state. If the height of the feet is
adjusted, the position of the mounting hole should be changed according to the actual situation.)
2.
Set the insertion length of the kick plate and bend the bracket teeth with pliers.
3.
Secure the brackets to the kick plate with screws and install the kick plate to the
bottom of the dishwasher.
595
498
51
15
Unit: mm
48.5
min.10 mm
clearance
6 mm
clearance
kick plate
bracket
Side view
min.10 mm
clearance
If you need to install the kick plate
inside, please cut the kick plate to
the appropriate height according
to the actual situation, and ensure
that the clearance between the
bottom surface of the kick plate
and the ground is at least 10 mm.
Method A:
Method B: