Omega OCC64TZW, Инструкция по эксплуатации

Страница: 8 / 17

5
INSTALLATION
INSTALLATION OF BUILT IN COOKTOP
• Cut the aperture dimensions as indicated in the figure. Locate the aperture on the worktop so that, after
the hob is installed, the following requirements are followed.
B (mm) 590 min. A (mm) 50
T (mm) 520 min. C (mm) 50
H (mm) 41-47.5 min. E (mm) 500
C1 (mm) 560 min. F (mm) 10
C2 (mm) 490 G (mm) 20
D (mm) 50 I (mm) 25
J (mm) 5
• In order to prevent leakage of any liquids on the counter, a special
sealing tape is supplied together with your cooktop. Apply the
supplied one-sided self-adhesive sealing tape all the way around the
lower edge of the cooktop. Do not stretch the tape.
• Screw the 4 worktop mounting brackets on to the side walls of the
appliance.
• Insert the appliance into the aperture.