Omega OCC64TZW, Инструкция по эксплуатации

Страница: 10 / 17

7
OPERATING INSTRUCTIONS
The buttons must be pressed within 3 seconds of selecting a heater, otherwise the heater selection will be
erased and the heat setting decimal point will disappear. If there is no further operation within 10 seconds,
the heater reverts back to S-Mode.
The heat setting can always be changed by pressing “+” or “-” . The available settings are between 1 and
9.
Each button operation or each display change is accompanied by a buzzer sound.
Switching Off Individual Heaters
A heater can be switched off in 3 different ways:
1. Simultaneous pressing of “+” and “-” buttons
2. Reduction of the heat setting to “0” by pressing the “-” button
3. Use of the timer switch-off function for the corresponding heater
Simultaneous operation of “+” and “-” buttons
The corresponding heater must be chosen with the Activate/Deactivate Heater Button , the Decimal Point
of the related Heater Display will then flash. To switch off the heater, “+” and “-” must be pressed
simultaneously. A buzzer will sound and “ 0 ” will appear in the heat setting display when this is successful.
If the timer is active for the selected heater, then “
0
” will appear in the heater and timer displays, and the
related Cooking Zone Indicator and the Timer Function will both switch off.
If there is any residual heat for the heater, this will be indicated by a “ H ” in the heat setting display.
Reduction of the heat setting to “0” by operating “-” button
The heater can also be switched off by reducing the heat setting to “ 0 ”.This will cause the associated
Decimal Point of the heater, the related Cooking Zone Indicator and the Timer Display to all switch off,
also. If there is any residual heat for the heater, this will be indicated by a “ H ” in the heat setting display.
Use of the timer switch-off function for the corresponding heater (if available)
After counting down to zero, the timer will stop, the corresponding Heater Display will show “
0
” and the
Timer Display will read ' 00 '. The corresponding Cooking Zone Indicator will disappear.
An assigned Dual/Triple Zone Selection Indicator will also disappear if it is active.
Additionally, the buzzer will sound when the timer stops. Pressing any button will silence the timer.