manualshive.com logo in svg
background image

 

 

Installation Instructions 

Electrical Connection 

 

 

LOCAL AUTHORITY REQUIREMENTS 

Installation is only permitted by a licensed electrician and carried out according to 
instructions provided by the manufacturer.  Incorrect installation might cause 
harm and damage, for which the manufacturer accepts no responsibility. 

 

Electrical Installation 

Before carrying out the connection to the power supply, the voltage rating of the appliance (stamped on the 
appliance identification plate) must be checked for correspondence to the available mains supply voltage, 
and the mains electric wiring should be capable o

f handling the oven’s power rating (also indicated on the 

identification plate). If you have any doubts, call in a qualified technician. 

 

NOTE

: For connections to the mains power supply, never use adapters, reductions or multiple power points 

as these may overheat and catch fire. Do not install separate timers. 

After having installed the appliance, the switched outlet must always be in an accessible position. The 
electrical safety of this appliance can only be guaranteed if the cooktop is correctly and efficiently earthed, 
always ensure that the earthing is efficient; if you have any doubts call in a licensed electrician to check the 
system. The manufacturer declines all responsibility for damage resulting from an installation which has not 
been correctly earthed. 

WARNING

: If any damage occurs to the power cable during or after installation, it must be replaced 

immediately by a licensed electrician with a replacement cable from your Service Centre. 

The cooktops are to be connected to a single phase 220-240Vac 50 Hz supply.  

The appliance is designed for fixed connection to the mains.  Means for disconnection with a suitable - 
isolating switch must be incorporated in the fixed wiring in accordance with the wiring rules

The power 

supply cord must not touch against any hot surfaces and must be placed so that its temperature does not 
exceed 75 °C at any point along its length.

 

 

 

 

Содержание OCC32KZ

















Отзывы: