![background image](http://html2.mh-extra.com/html/omega/obos605b/obos605b_instruction-manual_5152456006.webp)
4
Installation Instructions
•
Check that the power rating of the mains supply and of the sockets are suitable for the maximum
power of the appliance as indicated on the specification plate.
•
Plug should be accessible after installation. Fit the plug into a socket fitted with a third contact which
corresponds with the earth connection. This should be properly connected.
•
If the appliance just fitted with supply leads but does not come already fitted with a plug, then
permanently connect to fixed wiring as follow:
1-
The “yellow/green” earth wire, which must be connected to terminal, has to be about 10mm
longer than the other wires; the “blue” neutral wire has to be connected to the terminal marked
with letter N.
2-
“Black, brown, red” live wires have to be connected to terminal L. Mains connection can also be
made by fitting a double pole switch with a minimum gap between the contacts of 3mm,
proportionate to the load and complying with the regulations in force.
•
The yellow/green earth wire should not be controlled by the switch.
•
The plug or a double pole switch used for mains supply connection should be easy to get at, once
the appliance is in position.
•
The electrical safety of the appliance can only be guaranteed when it has been correctly connected
to an efficient earthed power supply, as laid down in the regulations for electrical safety.
•
The manufacturer cannot be held responsible for any damage to persons or objects due to lack an
earth connection.
IMPORTANT:
Position the mains supply cable so that it is never subjected to a temperature which is more than 50
℃
above ambient temperature.
The appliances are supplied with installation kits and can be installed in a worktop with the appropriate
dimensions. The installation and dimensions for oven are shown in the below figures:
3
Installation Instructions
The adjacent furniture must be able to withstand a minimum temperature rise of 50°C above the
ambient temperature of the room it is located in, during periods of use. The power supply to the
appliance must be cut off before any adjustments or maintenance work is done on it.
Preparation for Installation and Use
WARNING: This appliance must be installed by an authorised service person or qualified technician,
according to the instructions in this guide and in compliance with the current local regulations.
•
Incorrect installation may cause harm and damage, for which the manufacturer accepts no
responsibility, and the warranty will not be valid.
•
Prior to installation, ensure that the local distribution conditions (electricity voltage and
frequency) and the adjustments
•
of the appliance are compatible. The adjustment conditions for this appliance are stated on the
label.
•
The laws, ordinances, directives and standards in force in the country of use are to be followed
(safety regulations, proper recycling in accordance with the regulations, etc.).
Instructions for the Installer
•
Fit the appliance into its surround (beneath a work-top or above another appliance) by inserting
screws into the 2 holes that can be seen in the frame of the oven when the door is open.
•
The rear panel of the cabinet must be removed so that air can circulate freely. The panel to
which the oven is fitted should have a gap of at least 70 mm at the rear.
•
For a built-in oven to work well the cabinet must be of the right type.
•
The panels of the adjoining furniture should be heat resistant. Particularly when the adjoining
furniture is made of veneered wood, the adhesives should be able to withstand a temperature of
120
℃
. Plastic materials or adhesive which cannot withstand this temperature will become
deformed or unstuck.
•
To comply with safety regulations once the appliance has been fitted it should not be possible to
make contact with the electrical parts.
•
All parts which offer protection should be fixed in such a way that they cannot be removed
without the use of a tool.
•
•
Ensure that the appliance is switched off before replacing the lamp to avoid the possibility of
electric shock.
4
Installation Instructions
•
Check that the power rating of the mains supply and of the sockets are suitable for the maximum
power of the appliance as indicated on the specification plate.
•
Plug should be accessible after installation. Fit the plug into a socket fitted with a third contact which
corresponds with the earth connection. This should be properly connected.
•
If the appliance just fitted with supply leads but does not come already fitted with a plug, then
permanently connect to fixed wiring as follow:
1-
The “yellow/green” earth wire, which must be connected to terminal, has to be about 10mm
longer than the other wires; the “blue” neutral wire has to be connected to the terminal marked
with letter N.
2-
“Black, brown, red” live wires have to be connected to terminal L. Mains connection can also be
made by fitting a double pole switch with a minimum gap between the contacts of 3mm,
proportionate to the load and complying with the regulations in force.
•
The yellow/green earth wire should not be controlled by the switch.
•
The plug or a double pole switch used for mains supply connection should be easy to get at, once
the appliance is in position.
•
The electrical safety of the appliance can only be guaranteed when it has been correctly connected
to an efficient earthed power supply, as laid down in the regulations for electrical safety.
•
The manufacturer cannot be held responsible for any damage to persons or objects due to lack an
earth connection.
IMPORTANT:
Position the mains supply cable so that it is never subjected to a temperature which is more than 50
℃
above ambient temperature.
The appliances are supplied with installation kits and can be installed in a worktop with the appropriate
dimensions. The installation and dimensions for oven are shown in the below figures:
13
Cleaning
NOTE: Cleaning and maintenance operations must only be carried out when the oven is cool.
The appliance should be disconnected from the power outlet or turned off at your isolation
switch before commencing any cleaning process.
Cleaning the oven exterior
Before starting to clean your oven, be sure that all control buttons are off and your appliance has cooled off.
Unplug the appliance.
Do not use cleaning materials containing particles that might scratch the enamelled and painted parts of
your oven. Use cream cleaners or liquid cleaners, which do not contain particles. As these cleaners may
damage the surfaces, do not use caustic creams, abrasive cleaning powders, rough wire wool or hard tools.
In the event of any excess liquids spilling over your oven surface during cleaning, clean up immediately so
as to prevent possible damage to the enamel or metal surface. Do not use steam cleaners for cleaning the
oven.
Cleaning the interior of the oven
Make sure to unplug the oven before starting to clean it. You will obtain best results if you clean the oven
interior while the oven is slightly warm (the oven should not be operating). Wipe your oven with a soft piece
of cloth (e.g. dish cloth) dampened with warm soapy water after each use, rinse cloth in warm water then
wipe oven again and then finish by wiping with a dry cloth. For a complete cleaning process, use dry and
powder type oven cleaners, following the oven cleaning product’s instructions.
Troubleshooting
If the oven does not operate:
•
The oven may be unplugged from the power source or switched off at the power source.
•
The household fuse has blown or household power supply is off.
•
The Timer (if available) may not set correctly.
If the oven does not heat:
•
The heat may not be set correctly with the oven’s temperature setting.
If the interior lighting lamp does not light:
•
The lamps are defective. If they are defective, you can change them following the instructions
within this manual.
Cooking (if lower-upper part does not cook equally):
•
Control the shelf locations, cooking period and heat values according to the manual.
Unit smoking when first used:
•
This is a result of protective oils being removed and is to be expected with a first use.
Oven fan is still running even though knobs in off position:
•
The cooling fan has activated to cool down the control; this is normal and may stay on for some
time.
Clock Flashing on Display
•
Power failure or interruption
If you have any further problems with your product, please call your Authorised Service Centre.
6
Содержание OBOS605B
Страница 1: ...1 Instruction Manual OMEGA OVEN OBOS605B...