Omega OBO676X, Инструкции по эксплуатации и монтажу

Страница: 7 / 22

7
INSTALLATION
The adjacent furniture must be able to withstand a minimum temperature rise of 100°C above the
ambient temperature of the room it is located in, during periods of use. The power supply to the
appliance must be cut off before any adjustments or maintenance work is done on it.
PREPARATION FOR INSTALLATION AND USE
Manufactured with best quality parts and materials, this modern, functional and practical oven will meet your
needs in all respects. Make sure to read the manual to obtain successful results so as not to experience any
problems in the future. The information given below contains rules that are necessary for correct positioning and
service operations. They should be read without fail, especially by the technician who will position the appliance.
CHOOSING A PLACE FOR THE APPLIANCES
There are several points to pay attention to when choosing a place for your oven. Make sure to take into
account our recommendations below in order to prevent any problems and dangerous situations, which might
occur later!
When choosing a place for the oven, attention should be paid that there are no flammable or combustible
materials in the close vicinity, such as curtains, oil, cloth etc. which quickly catch fire.
Furniture surrounding the oven or cooktop must be made of materials resistant to temperatures above 100 C°.
Required changes to wall cabinets and exhaust fans above a built-in cooktop as well as minimum heights from the
oven board are shown in Figure 1. Accordingly, the exhaust fan should be at a minimum height of 65 cm from the
cooktop. If there is no exhaust fan the height should not be less than 70 cm.