8
LINKR-M1_EN-4/22/16
ORANGE (-) output #3 wire (optional):
This is a negative pulse 150mA output (add a relay if necessary). It’s
primary function is for ENGINE DISABLE but can be assigned to other
command buttons in the Linkr app if desired.
BROWN/WHITE (-) pulsed alarm trigger input wire (optional):
This input will send a VEHICLE ALARM notification to the user’s phone
when it detects 7 negative pulses within 10 seconds. Connect this to
the alarm’s horn honk output or flashing light output.
BROWN (+) steady alarm trigger input wire (optional):
This input will send a VEHICLE ALARM notification to the user’s phone
when it detects positive voltage (>5vDC) for 7 seconds continuously.
Connect this to the alarm’s positive siren output.
GRAY/BLACK (-) panic button/valet input wire (optional):
This input will send a PANIC notification to the user’s phone when it
detects a negative input for 3 seconds. It can also be used to turn off
the ENGINE DISABLE feature if the device cannot be reached from the
smartphone app. Connect this to the included push-button valet switch.
Connect the other wire of the valet switch to chassis ground.
PINK serial data wire (DO NOT CONNECT):
This wire has no function in a hardwire installation.
BLACK/WHITE serial data wire (DO NOT CONNECT):
This wire has no function in a hardwire installation.
Step 3b: Connect The Device - Hard Wire (cont’d)
LINKR-M1 install guide EN A6.indd 8
5/24/2016 4:00:51 PM